Coated close-coupled centrifugal pump with heat exchanger motor.
The cutting edge generation of coated herborner F-N-C block pumps with their unique 100% coating has a heat exchanger motor (C). The energy re-use principle of heat exchanger motors leads to considerable savings in heating costs and heat reduction of the plant room, for example by supplying the motor’s waste heat directly to swimming pool water for heating. In addition, these motors are characterized by lower noise emissions.
It is suitable for all applications where the medium must not be contaminated by corrosion products. Up to 500 µm coating provides an extremely smooth surface boosting the hydraulic efficiency of the pump by about 10% and offering energy savings over the years.
- Up to 10% energy saving due to low friction from HPC coating
- No more seizing up during start-ups even after long periods of downtime
- All components have been developed for optimized service and maintenance
- Simplifying daily operation procedures and saving costs
If you are looking to size your pump, Herborner has a powerful sizing application on their website.
To access the tool you need to register for an account on their website if you haven’t already.
Once you have registered an account you can find the PahnAI application under the “Web Apps” menu in the top right corner of the page.
With 100% coating, the friction losses are so low that efficiency is improved by up to 10%. The energy savings during continuous operation translates to particularly high efficiency. Up to 3 HP/h are saved when using a pump with 30 HP.
No more seizing up during start-ups even after long periods of downtime.
Optimized for service and maintenance
All components have been developed for optimized service and maintenance and intelligently assembled. Simplifying daily operation procedures and saving costs.