Yaskawa AquaVFD V1000-4X
1/8 to 25 HP
The V1000-4X is a version of the standard V1000 in an integral enclosure that meets NEMA type 4X/12 indoor use requirements, UL type 4X/12 standards, and the IP66 rating of IEC 60529. This enclosure provides the protection required in tough washdown or dust-tight environments, common in Food and Beverage Processing, Packaging, Metal Machining, Woodworking, Pumping, Refrigeration, and Printing. The enclosure is epoxy-coated to protect against the harmful effects of sanitizing chemicals commonly used in the aquatics industry.
200-240V / Three-Phase
| Normal Duty | Heavy Duty | ||||||
|---|---|---|---|---|---|---|---|
| Rated Output Current (Amps) |
HP | Rated Output Current (Amps) |
HP | Height (inches) |
Width (inches) |
Depth (inches) |
Model Number CIMR-VU |
| 6.0 | 1 | 5.0 | 1 | 6.38″ | 8.74″ | 7.28″ | 2A0006GAA |
| 9.6 | 3 | 8.0 | 2 | 7.36″ | 10.04″ | 9.25″ | 2A0010GAA |
| 12.0 | 3 | 11.0 | 3 | 2A0012GAA | |||
| 19.6 | 5 | 17.5 | 5 | 2A0020GAA | |||
| 30 | 7.5 | 25 | 7.5 | 11.42″ | 16.54″ | 12.01″ | 2A0030GAA |
| 40 | 10 | 33 | 10 | 2A0040GAA | |||
| 56 | 20 | 47 | 15 | 2A0056GAA | |||
| 69 | 25 | 60 | 20 | 18.31″ | 2A0069GAA | ||
380-480V / Three-Phase
| Normal Duty | Heavy Duty | ||||||
|---|---|---|---|---|---|---|---|
| Rated Output Current (Amps) |
HP | Rated Output Current (Amps) |
HP | Height (inches) |
Width (inches) |
Depth (inches) |
Model Number CIMR-VU |
| 2.1 | 1 | 1.8 | ¾ | 6.38″ | 8.74″ | 7.28″ | 4A0002GAA |
| 4.1 | 2 | 3.4 | 2 | 4A0004GAA | |||
| 5.4 | 3 | 4.8 | 3 | 7.36″ | 10.04″ | 9.25″ | 4A0005GAA |
| 6.9 | 4 | 5.5 | 3 | 4A0007GAA | |||
| 8.8 | 5 | 7.2 | 4 | 4A0009GAA | |||
| 11.1 | 7.5 | 9.2 | 5 | 4A0011GAA | |||
| 17.5 | 10 | 14.8 | 10 | 11.42″ | 16.54″ | 12.01″ | 4A0018GAA |
| 23 | 15 | 18 | 10 | 4A0023GAA | |||
| 31 | 20 | 24 | 15 | 4A0031GAA | |||
| 38 | 25 | 31 | 20 | 2A0038GAA | |||
Features
- NEMA Type 4X/IP66 enclosure
- Corrosion-resistant
- Current vector control, open-loop
- RoHS compliance
- On-line tuning
- Induction motor (IM) or permanent magnet synchronous motor (PM) operation
- Function Block Diagram (FBD) programming via DriveWorksEZTM • Starting torque of 200% at 0.5 Hz • Removable terminal block with parameter backup function
- “One-touch” copy function with verify
- Super-fast 2 ms scan cycle with dual CPU
- EN954-1 Safety Cat. 3, Stop Cat. 0 • Increased vibration resistance, from 20 Hz to 50 Hz (0.65G)
- 1 in 10,000 failure rate
- Swing PWM function to decrease noise at low carrier frequencies • Pre-maintenance function
- Modbus communication
- MTBF: 28 years
- Short Circuit Current Rating (SCCR): 30kA RMS symmetrical • Common programming with all other Yaskawa drives
Options*
- 120 VAC Interface
- Network Communications: DeviceNet, EtherCAT, EtherNet/IP, MECHATROLINK-II, MECHATROLINK-III, Modbus TCP/IP, PROFIBUS-DP, PROFINET
* Although the V1000-4X is compatible with most V1000 options, those options may not be waterproof. These options require special consideration regarding proper wiring techniques, including cable glands.
Specifications
| Item | Specification |
| Overload Capacity | 150% Overload for 60 sec. (Heavy Duty) |
| 120% Overload for 60 sec. (Normal Duty) | |
| Output Frequency | 0~400 Hz (higher frequencies available with custom software) |
| Control Methods | Open Loop Current Vector Control, V/f Control, PM Open Loop Vector Control |
| Simple closed-loop speed control available | |
| Protective Design | NEMA Type 4X/IP66 (dust/waterproof) |
| Braking Transistor | Standard in all models |
| Braking Torque | 20 – 40% increase with intelligent high-slip braking function |
| KEB Function | Uses mechanical energy to continue operation during a momentary power failure, standard |
| Overvoltage Function | Prevention function for die-cushion in a hydraulic mechanical press and other applications |
| Maintenance | Elapsed timer assists in preventative maintenance for cooling fan, capacitors, and transistors |
| Easily replaceable cooling fan | |
| Global Certification | CE, UL, cUL, RoHS, TUV |
| Available I/O | (7) multi-function digital inputs |
| (1) hardwire base block | |
| (2) multi-function analog inputs | |
| (1) multi-function pulse input | |
| (1) multi-function relay output | |
| (2) multi-function photo-coupler outputs | |
| (1) multi-function 0-10 Vdc analog output | |
| (1) multi-function pulse output | |
| Network Communication | Standard: RS-422/485 MODBUS 115 kbps |
| Optional: DeviceNet, EtherCAT, EtherNet/IP, MECHATROLINK-II, MECHATROLINK-III, Modbus TCP/IP, PROFIBUS-DP, PROFINET | |
| Keypad Operator | Standard LED 5 digit display |
| Optional multi-lingual, full-text remote LCD |